If it is so, try formatting your phone. Make sure that don’t format the boot-loader before flashing it. You can try downloading preloader and move it to target_bin folder and rename or move checksum.ini from target_bin.

1. Sp Flash Tool Drivers Download

List of SP Flash Tool errors. Open the scatter file using Notepad++ and change. S_DA_SDMMC_WRITE_FAILED (3149) Meaning: SP Flash tool was unable to flash.

Error 4008 Stopped at the purple bar after the finish of red bar. Fix: Take out the battery, and reinstall, enter into REC and choose turn the phone off. Then flash again.

I had the same problem too and here is the fix. You need to flash a signed ROM and you wont see that error.

3.1328 Thanks, I shall try this and get back to you. Oh, and I couldn't find the mt6572 vcomm drivers. The link on this forum goes to a facebook page that doesn't seem to have the drivers.

Solution: • Format the phone in SP flash tool (Do not format Bootloader) then try flashing the files again using Download • If Download doesn’t work then do a firmware upgrade • If the MTK backup contains more than one scatter file, retry flashing with the other scatter file. • If that isn’t feasible, try formatting first or use firmware upgrade • If that doesn’t work, open the scatter file using Notepad++ and change __NODL_FAT to FAT by removing “__NODL_”. Error 8100: Meaning: Cannot find USB port. Solution: • Install the Drivers. If already installed uninstall them and reinstall again. Meaning: Invalid file or incompatible recovery file.

Sp Flash Tool Drivers Download

Set it to “with battery”. Use the Format all + Download option. Hold both volume buttons before connecting to the PC for flashing and release those buttons once flashing starts. How to use SP Flash Tool for China mobile Smartphones? Watch this to Fix Flash Tool for China Phones. Please share this article below and!

I was in very bad shape when my Canvas 2 stuck on boot loader. But then after huge search I landed to your post and I went back to my stock ROM.

================ [Tool]SP FlashTool MTK Android FLASHER ======================.

Kisah saya mungkin berguna bagi Anda, mohon luangkan waktu Anda dan baca. Felicia, saya telah menikah dengan suami saya selama 8 tahun dan kami memiliki seorang putra berusia 4 tahun.

Problem: Sp flash tool updating successful but phone’s calibration doesn’t work Message: Soft Keys / Touch Screen not working / responding. Need to use Notepad++ and edit scatter file and remove NODL__ (or set is_download: false to is_download: true ) in front of the items you have in the backup folder but aren’t listed when you load the scatter file in SP tool.

• Update VCOM drivers. Error 8417: BROM ERROR: Initialize scatter file failed. Please check the scatter file name you load is legal Meaning: The format of Scatter file is invalid. Solution: Open the scatter file in Notepad++, the first line must beginning with: ############################################################################################################## General Setting # If there is anything else above this then delete it and save the scatter file.

In general, this error is treated to download all the blocks (one can usrdata enough), then the size in the PMT should switch to the right. Solution: • Use different version of Flash Tool Error 4058: BROM ERROR: S_FT_GET_MEMORY_FAIL (4058) Meaning: Flash tool was unable to locate the partition you’re trying to flash. Solution: Un-tick any item with a blank or empty location Error 5002: S_INVALID_DA_FILE Meaning: The Download Agent (DA) file selected is not compatible. DA file is attached to the Flash Tool release, so choose the one which is provided in the Flash Tool folder.

Below is a list of SP Flash Tool errors, their meanings and how to resolve them Phone is totally dead Message: Phone no longer responds to power button Solution: • Follow this guide @ Phone still not working after flashing Message: Phone still stuck at Bootlogo or Bootloop Solution: • Ensure there's a formatted SD card in the phone before flashing • Give up to 5 minutes because first boot takes time • Boot the phone into recovery mode then wipe data / factory reset • Remove the battery for 30 seconds then slot back in • Try a firmware upgrade. Looks like SP flash tool is having problems communicating / connecting to your phone. Are you sure you switched off the phone > clicked download > clicked ok when prompted then connected the switched off phone still with battery inside?

Very important warning:Always make sure that you trust the sources of the ROM you download and know that it is meant for your phone. After flashing a wrong preloader, your phone will be completely dead (can't be powered on, it will not charge and won't be detected anymore by the computer) and there is no way to recover it. ================ [Tool]SP FlashTool MTK Android FLASHER ======================.

Try SP flash tool v. (, 11:11 PM)hovatek Wrote: Looks like SP flash tool is having problems communicating / connecting to your phone. Are you sure you switched off the phone > clicked download > clicked ok when prompted then connected the switched off phone still with battery inside? You need to install mt6572 vcomm drivers else SP flash tool will be blind to your phone 3. Consider changing the USB cord and also PC port you're using 4. Make sure SP flash tool is set to auto-detect com port, not manual selectiom 5. Try SP flash tool v.

• Use different PC (preferably Windows XP) with all the drivers loaded. Error 3149: BROM ERROR: S_DA_SDMMC_WRITE_FAILED (3149) Meaning: SP Flash tool is unable to flash files to the device. Solution: • Use the latest version of SP flash tool and run it as Administrator • Format first then Download • Don’t tick a box with an unspecified/empty file path • Ensure the phone is switched off and has enough Charge before connecting to PC for flashing • Try a different PC • Try a different ROM • Try a different USB cord • Try formatting the phone first before flashing files to it Error 3168: BROM ERROR: S_CHIP_TYRE_NOT_MATCH (3168) Meaning: SP Flash Tool detects that there is a mismatch between the information provided in the scatter file and device’s info.

SP Flash Tool is a flashing application which helps to take backup of your device’s firmware or flash the firmware back to your device. It is compatible with the MediaTek powered devices and works with almost all the MediaTek Devices like Smartphones, Smartwatches etc. Tough the application is simple to use but it throws many errors without proper information. So, today we are going to share the list of SP Flash Tool errors (BROM Errors) and give their meanings and solutions to fix them. We have covered almost all the SP Flash Tool errors on this page and if we have missed any, then you can post them in the comment section below. How to Fix SP Flash Tool Errors (BROM Error Codes): SP Flash Tool Failed to enumerate COM Port This error clearly means that the Flash Tool has issues finding the COM port on which your device is connected.

• Use different PC (preferably Windows 7 or XP). • Try different USB Cable. Error 4004: Driver Error Meaning: Drivers not found or corrupted. Solution: Uninstall drivers and reinstall them. Error 4009: S_FT_READBACK_FAIL (4009) Meaning: SP Flash Tool failed to create Readback file possibly due to not enough space for a file or file cannot be overwritten because it is locked. Solution: • Use the different version of SP Flash Tool • Delete old Readback files Error 4010: BROM ERROR: S_FT_FORMAT_FAIL Meaning: The blocks map in the scatter file doesn’t match the device’s partition sizes Solution: • Use the correct firmware for your device model.

Hello there, I have a dilema (noobish one, won't take long;D) preventing me to do this, and make my new zte v970 usable, so please help if you can. 1.After the driver is installed (I right clicked Install on the proper driver,) when will COM37 Port appear in Device Manager? When the phone is connected via usb? After the driver installation or detected when connected via usb and executing sp tools? Thx in advance, p.s.I remember migrating to custom ROM with my zte blade and boy I had trouble finding the right version of files needed. Thanks a Lot Bruno. Kudos to u.!!

Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.

I can install and flash with a OS that boots directly from a harddrive (Windows 7, XP) but Linux (Ubuntu 12.04LTS) using Vmware or VirtualBox it does not actually recognise the bootloader mode. Linux does not recognise the bootloader mode of the phone. It will only list it in the USB devices list if I turn the phone on normally. In ubuntu's terminal I type 'lsusb' it shows all my attached USB devices: My phone when turned on shows this Bus 001 Device 020: ID 0bb4:0001 High Tech Computer Corp. I then turn off the phone and take out battery and put the battery back in and insert the USB data cable. (Phone screen shows battery symbol) and I redo the Linux command again 'lsusb' and it shows notthing.

Change the USB cord, port and Computer also. Right-click flash_tool.exe > Select Properties > Select Compatibility > Set to Windows XP Service Pack 3 > Click Apply > Click OK > Run SP flash tool as Administrator. Try different USB cord. Try a different port on the computer or another PC Ensure the battery is well charged inside in the switched off mobile phone before connecting to Computer for flashing. Error 1013 – Error Message: BROM ERROR:S_COM_PORT_OPEN Fail(1013). (Smart Phone flash tool encountered an error while attempting to communicate with the device via the target port).

Any help would be appreciated. If you use MTK Droid tools to backup your rom, it will also create a scatter file. Also great for flashing other roms. Just copy the image files for the new rom to a directory with the scatter file.

1.) remove phone, shutdown, remove battery (do not connect until later) 2.) get MT65xx USB VCOM driver (usb2ser_Win764.inf), startup Win7 VM and add the driver to 'c: windows inf' folder. Shutdown Win 7 VM.

Basic Guide for SP-Flash-Tool • Download and unzip the package, Open SPFLASHTOOL EXE and Load the Scatter file ( Click Scatter Loading) • Uncheck all the boxes • Go to / click RECOVERY box from list and load recovery image according to your device/choice ( load image from the separate window -->open) • Now you can see RECOVERY box is checked and you can see the recovery image location ( uncheck all other boxes) • Switch off your smartphone • Connect the device and Click on 'DOWNLOAD' button on top ( not the tab), If it asks click on 'yes' • It is done and MTK flashTool will do the rest. If you have a problem with flashing utility or drivers install MediaTek USB drivers from our links. After Saucerful run you will be prompted with a green circle. Congrats you have successfully flash your MediaTek Android smartphones with SP Flash Tool.

Only with the right string, front camera will be ok. If you want, can you study this string? I thinks that they can more help for programming phono. I no be able to make it:-( i know only make paste©:-) thanks a lot angelobiz. Thank you so much for this -- it is helping out a huge number of us! A question for you if you had a second: Do you know if the SP tool restores partitions when it flashes (or can be set to do this)?

Hubungi DR Okosu hari ini dan saya yakin Anda tidak akan menyesal. Email: drokosu01@gmail.com atau whatsaap +571.

Error 3168 – Error Message: BROM ERROR: S_CHIP_TYRE_NOT_MATCH(3168). ( Sp flash tool judges that there’s a mismatch between scatter file and the device information. Fix: Ensure that you are using the ROM for the correct phone model.

Try the latest version of SP flash tool. Do install the respective drivers for the phone on the Pc.

Try changing the USB cord. Ensure the phone’s USB port is not damaged. Error 2020 Error Message: BROM ERROR: S_BROM_CHKSUM16_MEM_RESULT_DIFF (2020). (SP tool has an issue moving the files to be flashed into the phone’s internal SRAM). Fix: Try with the latest version of SP flash tool. In the SP flash tool, navigate to Options > Option > Connection > Battery. Set it to “with battery”.

Keep up good work. Thanks a lot again. I will spread the word.

Error 8406: SP FLASH TOOL ERROR (8406) Meaning: Compatibility issues. Solution: • Flash the right firmware for your exact device model. • Update VCOM drivers. Error 8417: BROM ERROR: Initialize scatter file failed. Please check the scatter file name you load is legal Meaning: The format of Scatter file is invalid.

Try different USB cord. Try a different port on the computer or another PC Ensure the battery is well charged inside in the switched off mobile phone before connecting to Computer for flashing. Error 1013 – Error Message: BROM ERROR:S_COM_PORT_OPEN Fail(1013). (Smart Phone flash tool encountered an error while attempting to communicate with the device via the target port). Fix: Try changing different port on the PC. Try a different or latest version of SP flash tool. Install VCOM drivers.

Bagindo Kayo menyarankan untuk tidak menikah dengan Poniem karena bukan dari negara yang sama dengan Leman. Novel merantau ke deli pdf. Mendengar cerita kehidupan Poniem, Leman mengajukan lamaran ke Poniem untuk menjaganya. Karena keputusan dirinya ingin menikah dengan Poniem, Leman datang ke Bagindo Kayo untuk meminta nasihat. Leman mengacuhkan saran Bagindo Leman, dan akhimya mereka menikah.